cff-version: 1.2.0
abstract: "Purpose of the test campaign: the purpose of these experiments was to investigate a new design criterion for mode I characterization of bi-material bonded joints. The bi-material Double Cantilever Beam (DCB) specimens were tested. Test equipment: all tests were performed on a 20 kN tensile test machine. The crack length was measured by means of a Digital Image Correlation (DIC) system or a camera system. The applied force and displacement were measured by the tensile test machine, and also sent as inputs to the Digital Image Correlation (DIC) system or to the camera, in order to facilitate synchronization of the data."
authors:
  - family-names: Lopes Fernandes
    given-names: Romina
    orcid: "https://orcid.org/0000-0003-2257-3339"
  - family-names: Wang
    given-names: W. (Wandong)
    orcid: "https://orcid.org/0000-0002-6610-0368"
  - family-names: Teixeira de Freitas
    given-names: S. (Sofia)
    orcid: "https://orcid.org/0000-0002-0847-6287"
  - family-names: Zarouchas
    given-names: D. (Dimitrios)
    orcid: "https://orcid.org/0000-0001-5177-5138"
  - family-names: Benedictus
    given-names: R. (Rinze)
    orcid: "https://orcid.org/0000-0003-3219-3161"
title: "Supplementary data for the paper: How pure mode I can be obtained in bi-material bonded DCB joints: a longitudinal strain-based criterion"
keywords:
version: 1
identifiers:
  - type: doi
    value: 10.4121/uuid:32c09da7-3fd5-48e7-8711-82b1740b7a62
license: CC BY 4.0
date-released: 2019-08-13